Hilti SF 2H-A Manual Del Usuario página 39

All manuals and user guides at all-guides.com
4 Technical data
4.1 Hammer drill/driver
Rated voltage
Weight in accordance with EPTA
procedure 01/2003
Speed
Torque (soft joint)
Torque range (15 settings)
Keyless chuck clamping range
Ø drill bit (softwood)
Ø drill bit (hardwood)
Ø drill bit (metal)
4.2 Noise information and vibration values determined in accordance
with EN 60745
The sound pressure and vibration values given in these instructions have
been measured in accordance with a standardized test and may be used to
compare one electric tool with another. They may be used for a preliminary
assessment of exposure.
The data given represents the main applications of the electric tool. However,
if the electric tool is used for different applications, with different accessory
tools, or is poorly maintained, the data may vary. This may significantly
increase exposure over the total working period.
An accurate estimation of exposure should also take into account the times
when the power tool is switched off, or when it is running but not actually
being used for a job. This may significantly reduce exposure over the total
working period.
Identify additional safety measures to protect the operator from the effects
of noise and/or vibration, for example: maintaining the power tool and
accessory tools, keeping the hands warm, organization of work patterns.
Noise emission values determined in accordance with EN 60745
Emission sound pressure level (L
Uncertainty for the sound pressure level (K
Sound (power) level (L
Uncertainty for the sound power level (K
26
1st gear
2nd gear
pA
)
WA
10.8 V
1.2 kg
0 rpm ... 400 rpm
0 rpm ... 1,500 rpm
≤ 12 Nm
0.5 Nm ... 3.5 Nm
0.8 mm ... 10 mm
0.8 mm ... 14 mm
0.8 mm ... 10 mm
0.8 mm ... 6 mm
SF 2H­A
) 85 dB(A)
) 3 dB(A)
pA
96 dB(A)
) 3 dB(A)
WA