Hilti SF 2H-A Manual Del Usuario página 45

All manuals and user guides at all-guides.com
Trouble or fault
The battery doesn't
engage with an audi-
ble click.
The power tool or
the battery becomes
very warm.
8 Disposal
WARNING
Risk of injury. Hazards presented by improper disposal.
▶ Improper disposal of the equipment may have the following conse-
quences: The burning of plastic components generates toxic fumes
which may present a health hazard. Batteries may explode if dam-
aged or exposed to very high temperatures, causing poisoning,
burns, acid burns or environmental pollution. Careless disposal may
permit unauthorized and improper use of the equipment. This may
result in serious personal injury, injury to third parties and pollution of
the environment.
▶ Dispose of defective batteries right away. Keep them out of reach of
children. Do not disassemble or incinerate the batteries.
▶ Batteries that have reached the end of their life must be disposed of
in accordance with national regulations or returned to Hilti.
Most of the materials from which Hilti tools and appliances are manu-
factured can be recycled. The materials must be correctly separated before
they can be recycled. In many countries, your old tools, machines or appli-
ances can be returned to Hilti for recycling. Ask Hilti Service or your Hilti
representative for further information.
In accordance with the European Directive on waste electrical and electronic
equipment and its implementation in conformance with national law, electric
tools or appliances that have reached the end of their life must be collected
separately and returned to an environmentally compatible recycling facility.
Possible cause
The retaining lugs on the
battery are dirty.
Electrical fault.
The tool is overloaded
(application limits ex-
ceeded).
Action to be taken
▶ Clean the retaining lug
and push the battery
in until it engages.
Contact Hilti Service if
the problem persists.
▶ Switch the power
tool off immediately,
remove the battery,
keep it under obser-
vation, allow it to cool
down and contact
Hilti Service.
▶ Select a suitable
power tool for the
application.
31