All manuals and user guides at all-guides.com
Note
The belt hook allows the power tool to be attached to a belt worn by
the operator. The belt hook can be fitted to allow attachment on the left
or right side of the body.
▶ Fit the belt hook.
5.3 Selecting the function
▶ Select the desired function.
5.4 Setting the torque
▶ Set the desired torque.
Note
The torque is limited only when the power tool is set to screwdriving
mode .
5.5 Selecting the gear
Note
The gear selector switch can be operated only when the motor is not
running.
▶ Select the gear.
5.6 Setting forward or reverse rotation
Note
An interlock prevents switching while the motor is running.
The control switch is locked when the forward/reverse switch is in the
middle position (safety lock).
▶ Set the forward/reverse switch to the desired direction of rotation.
5.7 Switching on
▶ Press the control switch.
◁ Speed of rotation is regulated by the distance the control switch is
pressed in.
5.8 Switching off
▶ Release the control switch.
5.9 Fitting the accessory tool
1. Set the forward/reverse switch to the middle position or remove the
battery from the power tool.
2. Open the keyless chuck.
28
4
5
6
7