Adjusting The Recline Position - Cybex Platinum CLOUD Q Manual Del Propietário

USING THE INFANT CARRIER OUTSIDE OF THE VEHICLE

ADJUSTING THE RECLINE POSITION

A new function of the Cloud Q is that it can be reclined to an almost
horizontal position outside of the car. With an extended leg-rest
and a fully reclined backrest, the child can lie comfortably and in an
ergonomically correct position.
The recline angle can be adjusted easily with one hand without
having to take the child out of the carrier, and the handle remains in
the carrying position for easier mobility.
1. While holding one hand on the handle, simply squeeze
the Recline Release Handle and push the seatback
down until it locks into the full recline position.
In the reclined position a red blocker closes off the lap belt
guide to indicate that it is not allowed to use the carrier in a
vehicle when the carrier is reclined.
2. To get back to Car Seat Mode simply squeeze
the Recline Relase Handle and lift backrest up
until it locks into the upright position.
Combined with the CYBEX Priam and M-strollers the Cloud Q
becomes a both striking and very practical travel system.
The CYBEX CLOUD Q must only be reclined outside of
the vehicle.
NEVER INSTALL this child restraint in a vehicle when
the carrier is in the reclined position.
1
RECLINED MODE
2
CAR SEAT MODE
22