Putting The Device Into Use - Casada Skyliner A300 Manual

PuttinG the Device into use

stArting the mAssAge
1) C onnect the remote control to the chair (CONTROLLER JACK). Then connect the massage chair to
the power supply system. To do this, connect the power cable supplied to the socket and the chair
(POWER INPUT). The connections are located on the bottom rear of the device (see following illustra-
tion) Now turn the main switch to the ON position.
2) P ress the power button on the remote control. The chair automatically moves to the preset position.
3) T he chair now automatically starts to scan your body shape and shoulder height. If this is finished (re-
mote control starts to beep), you can select your automatic programme. If you do not make a selection,
the "Comfort" programme starts automatically.
4) I f the shoulder position detected deviates from the actual shoulder height, this can be manually set
using the „up" - or „down" button (see illustration).
Keys on
the remote control
Shoulder position-
Alignment (upper button)
Shoulder position-
Alignment (lower button)
5) D uring scanning of the shoulder height, you can directly select a previously stored massage pro-
gramme M1 or M2 (Memory Function). This way the scanning is directly terminated and the chair starts
the memory programme.
26
Connection procedures
description
this moves the massage heads upwards.
this moves the massage heads downwards.
PROGRAM MEMORY
TOUC H S C R E E N
F US E ON/OF F
P OWE R INP UT C ONT R OLLE R J AC K
electrical power switch
Display