Maintenance - Hallins 75 Manual

10 MAINTENANCE

In order for your lifting trolley to operate in the best possible way, it is important that you
perform regular maintenance as described below.

Remove the load from the load bed before starting maintenance work.

Inspections, service and repairs must be carried out by qualified personnel.
Document any checks and repairs in a register.
This comprises: Date of inspection or repairs, inspection status, executed repairs and
details on who has carried out the inspection or repair.
Daily
1. Check that the mains cable is not connected to the mains power supply
2. Check that the lifting trolley's control unit and cable stand are not defective
3. Clean the lifting trolley according to cleaning instructions
Every month
1. Check all electrical connections and components and take remedial action concerning
any damage and wear. Replace with new parts where necessary.
2. Check the chassis, mast and load bed for any and all types of defects, cracks,
misalignment, corrosion etc., and that all locking devices are in place and correctly
attached.
3. Check that all wheels rotate freely and that the tyre rubber is intact. Lubricate the ball
bearings in the race.
4. Check that the wheel brakes are undamaged and work properly.
5. Check that the drive chain is undamaged.
6. Check that all stickers are legible and are in their right places.
7. Check that any strapping devices that may be used for the goods are intact and in
working order
11