NuWave OXYPURE ZERO Manual Del Propietário página 19

2. The Bio-Guard and Bio-Guard 360 Filters (Filters 2 & 4)
•
Immerse the filters in water immediately to eliminate the chance of
any contaminants being released into the air.
•
Wash and rinse as directed, but only long enough to clean the filter.
•
After rinsing, shake the water out the filter to help dry the filter's
internal electrical components.
•
Dry thoroughly, away from direct sunlight, in a room with a strong
breeze or a fan to blow air through the filter. Remember: The Bio-
Guard Filter carries an 8,000V charge when it is operating, so it
MUST be completely dry inside and out before it is reinstalled into
the OxyPure.
3. The Ozone Emissions Removal Filter (Filter 3)
• DO NOT get the Ozone Emissions Removal Filter wet.
•
Take this filter outside if at all possible.
•
Clean with a brush-equipped vacuum.
•
Marks on the filter media are normal and expected. They have no
effect on the filter's functionality.
Filter Maintenance
When maintaining the filters, unplug the unit and open the Filter Access
Panel. You will see that the order of the filters, from the outside in,
is as follows:
1. 2 Stainless-Steel Prefilters (Filter 1)
2. 2 Bio-Guard
®
3. 2 Ozone Emission Removal Filters (Filter 3)
4. 1 Bio-Guard
®
Filters (Filter 2)
360 Filter (Filter 4)
nuwavenow.com
19