Parts 8 to 10 are not visible in the figures above. They are located on the back
of the casing.
Description of the control panel
1. On / Off button
2. Timer LED
3. Timer button
4. Display
5. "Heat" LED
6. "Fault" LED
7. "Set" LED
8. Value increase button
9. Value decrease button
10. Set button
3.2.
APPLIANCE LOCATION
The temperature of environment must not be higher than 40°C and the relative
humidity should be less than 85%. Ensure good ventilation in the room in which
the device is being used. There should be at least 50 cm distance between each
side of the device and the wall or other objects.
Preparing for use