2.3 Leveling the doors
List of tools to be provided by the user
DIAGRAM OF DOOR ADJUSTMENT
Pliers
Not level
Hinge
grommet
Pliers
Fastener-ring
Lower hinge
Precautions to take before this operation
1) Before performing this operation, make sure that
the refrigerator is disconnected from the power
source.
Before adjusting the door, take precautions to prevent
any bodily injury.
2) Raise the lower door up to the level of the higher
door.
3) Using pliers, insert the supplied fastener ring into
the gap between the hinge-grommet and the lower
hinge. The number of fastener rings you need to insert
will depend on the gap. See the figure.
EN
11