Notes On Digital Operation - Minitrix 798 668-0 Manual

Notes on digital operation

• Note: Please note that not all functions are possible in all
digital protocols. Several settings for functions, which are
supposed to be active in analog operation, can be done
under mfx and DCC.
• We recommend putting the two units together as an m.u.
combination (DCC: Consist Address) for operation with a
trailer car or control car (example: 15091).
Notes on operating under mfx
• No address is required under mfx; each decoder receives
a non-recurrent and unique identifier (UID).
• The decoder automatically logs on to a Central Station or
Mobile Station with its UID and name.
• Name ex works: 798 668-0
• The settings of the decoder can be programmed via the
graphical interface of the Central Station or also in part
with the Mobile Station.
Multiple Unit Combination with the Central Station 3 under mfx
Call up the locomotive menu in the Central Station 3 and
select „Create M.U. Combination". Assign a unique name
for the M.U. combination and then drag the desired unit
from the locomotive list into the open field. After you have
confirmed the selection, the M.U. combination will appear in
the locomotive list with the image of the lead unit.
General Note to Avoid Electromagnetic Interference:
A permanent, flawless wheel-rail contact is required in
order to guarantee operation for which a model is designed.
Do not make any changes to current-conducting parts.
11