Starting Up; Starting Up The Boiler (Steam); Preparing The Vacuum Cleaner - Lavor GV EGON VAC Manual Del Usuario

6.1 Starting up the boiler (steam)

WARNING: When preparing the appliance for use,
switch it off and unplug it.
WARNING: the appliance must be placed on a
horizontal flat surface.
• Remove the boiler water tank cap (C) (Fig. 1)
• Fill the boiler water tank (L) (max 1.2 litres) with
distilled water.
• Put on the boiler water tank cap (C).

6.2 Preparing the vacuum cleaner

The appliance is supplied and equipped with a microfibre
filter (P) which is already assembled.
WARNING: for safety reasons, the handgrip (T) can be
released only if the quick connector (27) is not
inserted.
• Lift the safety cover (V) (Fig. 2)
• Insert the quick connector (27) of the flex (1) by
pressing the front button (28) into the steam socket
(W) (Fig. 3)
• Make sure it is properly fastened: (once in position
button (28) should click)
• Plug the power cable (B) into an appropriate socket
provided with an earthing system.
• Press the main switch (D); the pilot light (H) will
come on (Fig. 4)
EN

6 STARTING UP

C
L
T
28
H
D
Fig. 1
Fig. 2
V
W
Fig. 3
27
Fig. 4
35