Lavor GV EGON VAC Manual Del Usuario página 42

STEAM/SUCTION CONNECTOR (9), STEAM
ATTACHMENTS, SUCTION ATTACHMENTS
• Fit the steam/suction connector (9) into the
handgrip (26) or extension tube (2).
The steam/suction connector (9) is equipped
with concentrated steam diffuser (Fig. 32), to
clean limescale, splits, etc., and is equipped
with connector for suction attachments
(Fig. 35).
The following attachments can be used:
• extension for steam nozzle (10), to clean
limescale, splits, etc. (Fig. 34)
• small nozzle brush, scraper, small triangular
nozzle (or other attachments, see
packaging) to be directly applied on the
steam/suction connector (9) (Fig. 33), or on
the steam nozzle extension (10) (Fig. 34), to
clean limescale, splits, etc.
• crevice (17) (Fig. 36), for suction in difficult
points, corners, sofa creases, etc.
• brush (19) (Fig. 37), with natural bristles,
for more effective suction and cleaning.
• radiator attachment (18) (Fig. 38), specific
for suction of dust in radiator splits, to be
used together with the crevice (17).
NOTE: Depending on the model, differences in
the supply may occur (see packaging).
42
Fig. 32
Fig. 33
Fig. 34
Fig. 35
Fig. 36
Fig. 37
Fig. 38
EN