Home Decorators Collection ACKERLY 59210 Guía De Uso Y Mantenimiento página 11

Assembly - Attaching the Light Kit
1
Installing the light kit pan
IMPORTANT: It is critical to attach the light kit pan using the
quick connector. The fan will not operate unless the light kit
pan is connected to the fan.
☐ Remove one screw (PP) from the black bracket below the fan
motor assembly (E), and loosen but do not remove the other two
screws.
☐ Connect the wires from the light kit pan (G) to the wires from
the fan motor assembly (E) by connecting the 9-pin connectors
together. Carefully tuck all wires and splices into the switch cup.
☐ Push the light kit pan (G) up to the fan motor assembly (E) so
that the two loosened screw heads fit into the keyhole slots.
Turn the light kit pan (G) clockwise.
☐ Re-install the screw (PP) that was removed in step 1.
☐ Make sure all the screws are firmly tightened.
2
Attaching the light kit fitter assembly
CAUTION: To reduce the risk of electric shock, disconnect
the electrical supply circuit to the fan before installing the
light kit pan.
☐ Remove one screw (QQ) from the light kit pan (G) and loosen,
but do not remove the other two screws.
☐ Connect the wires from the light kit fitter assembly (H) to
the wires from the fan motor assembly (E) by connecting the
molded adaptor plugs together. Carefully tuck all wires and
splices into the switch cup.
☐ Push the light kit fitter assembly (H) up to the light kit pan
(G) so that the two loosened screw heads fit into the keyhole
slots. Turn the light kit fitter assembly (H) clockwise to secure.
☐ Re-install the screw (QQ) that was removed in step 1.
☐ Make sure all the screws are firmly tightened.
3
Installing the shatter resistant bowl
CAUTION: Make sure the power is off before attaching or
removing the shatter resistant bowl.
WARNING: Allow the shatter resistant bowl to cool completely
before removing.
☐ Place the shatter resistant bowl (I) into the light kit pan (G),
aligning the three flat areas on the top flange of the shatter
resistant bowl (I) with the three raised dimples in the light
kit pan.
☐ Turn the shatter resistant bowl (I) clockwise until it stops.
☐ Attach the pull chain extensions (CC) provided to the fan and
light pull chain.
11
Please contact 1-800-986-3460 for further assistance.
E
PP
G
G
H
QQ
G
CC
I
HOMEDEPOT.COM/HOMEDECORATORS