Operating Your Fan - Home Decorators Collection ACKERLY 59210 Guía De Uso Y Mantenimiento

Operating Your Fan

Turn on the power and check the operation of the fan. The fan pull chain
controls the fan speed as follows:
1 pull - High; 2 pulls - Medium, 3 pulls - Low, 4 pulls - Off.
Speed setting for warm or cool weather depends on factors such as the
room size, ceiling height, number of fans and so on.
The fan is shipped from the factory with the reversing switch (YY)
positioned to circulate air downward. If airflow is desired in the opposite
direction, turn your fan off and wait for the blades to stop turning, then
slide the reversing switch (located on the light kit pan) to the opposite
position, and turn the fan on again. The fan blades will turn in the
opposite direction and reverse airflow.
Warm weather - (Forward) A downward airflow creates a cooling effect.
This allows you to set your air conditioner on a higher setting without
affecting your comfort.
Cool weather - (Reverse) An upward airflow moves warm air off of the
ceiling. This allows you to set your heating unit on a lower setting
without affecting your comfort.
A. Warm weather
B. Cool weather
12
YY