Accessories (Optional); Measuring Cup - Jacto Djb Manual Del Operador

• Turn on the sprayer and the agitation system according to item "9.12. Activate/
Deactivate agitation system";
Horizontal position
Agitation lever
• Let the water circulate through the system for a few minutes;
• Dispose of the water used to clean in an appropriate location.
10.1.1. Lubricating the agitation system
• With the sprayer OFF, move the agitation lever to the horizontal position as
shown in figure A.
A)
Agitation lever
• Lubricate the darker areas indicated in the figure below.
• Move the agitation lever to the vertical position as shown in figure B.
B)
Vertical position
• Lubricate the darker areas indicated in the figure below at every 100 hours
of use.
14/62
Horizontal position
Agitation lever

11. Accessories (optional)

11.1. Anti-growth lance
Nº Code
1 1236093
11.1.1. Assembly instructions
1. Connect the anti-growth lance to the trigger valve;
2.
Tighten enough to avoid leakage.
11.1.2. Use
The Tobacco lance is indicated for the application of anti-growth in tobacco.

11.2. Measuring cup

Nº Code
1 963959
11.2.1. Use
Recommended for calibrating the application dose.
11.3. Extension 600
Nº Code
1 1222729
1
Description
ANTI-GROWTH LANCE
Description
MEASURING CUP
Description
EXTENSION 600
Qty.
1
Qty.
1
Qty.
1