Making Coffee With A Preset Time; Deactivating The Preset Time - Beem Fresh-Aroma-Perfect Superior Manual De Instrucciones

EN

Making Coffee with a Preset Time

To make coffee with a preset time, the clock needs to be set (see the "Handling and Opera-
tion" chapter – "Time").
1. Prepare the coffee machine, pour in coffee beans or coffee powder, fi ll the water tank (6) and
insert the permanent fi lter (10) or a fi lter paper (see the "Handling and Operation" chapter).
2. Press the button Timer (21) for approx. 3 seconds until the display fl ashes.
3. Use the buttons H (18) and M (17) to set the start time you want (see the "Handling and
Operation" chapter – "Time").
4. Set the coffee strength and the number of cups you want (see the "Handling and Operation"
chapter – "Setting the Coffee Strength" and "Setting the Number of Cups").
5. To activate the preset time, press the button Timer again. The operating status indicator
Timer lights up constantly. The preset time is activated.
– For preparation with coffee powder, press the button
the preset time. The operating lamp
– For preparation with coffee beans, do not press any other button if you have activated the
preset time. If the operating lamp
Once the preset time is reached, the device switches on automatically. The display (15) shows the
programmed settings and
If the display should stop fl ashing even though the setting has not yet been completed, press
the button Timer again for around 3 seconds. The display fl ashes again and the settings can
be resumed.

Deactivating the Preset Time

To deactivate the preset time setting, press the button
Timer
button goes out and the programming is deactivated. However, the preset time is retained
and can be reactivated at any time until a new preset time is programmed in or the device has
been disconnected from the power supply for more than a minute.
lights up.
is lit up, press the button
.
(16) once you have activated
Timer
(21). The operating lamp of the
30
until it goes out.