Cleaning And Care - Beem Fresh-Aroma-Perfect Superior Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

31

Cleaning and Care

PLEASE NOTE!
Do not use any toxic, corrosive or abrasive cleaning agents or scouring sponges to
clean the device. These can damage the surface.
1. Empty the permanent fi lter (10) or the fi lter paper used after each use.
2. Clean the permanent fi lter and the fi lter insert (9) with mild detergent and warm water or in
the dishwasher.
3. Clean the coffee jug after each use with mild detergent and warm water. It must not be placed
in the dishwasher.
4. If necessary, wipe down the coffee bean compartment (2) and the lid (1) with a damp cloth.
5. Wipe down the housing with a damp cloth. If necessary, use a little mild detergent to remove
any stubborn residues.
6. Check the connecting cable regularly for any damage.
Cleaning the Coffee Jug Thoroughly
Coffee grounds and coffee oil residues can contaminate glass or thermal jugs over time. They
should therefore be thoroughly cleaned regularly (at least every 4 weeks).
We recommend that you do this using BEEM premium cleaning tablets. They will remove the residues
quickly and easily. In addition, the cleaning tablets are gentle on the material and guarantee food-safe
and environmentally friendly cleaning - ensuring an authentic coffee fl avour. BEEM premium cleaning
tablets can be obtained from selected specialist stockists, directly via our website www.beem.de or
from our customer service department on request.
Cleaning with the BEEM Premium Cleaning Tablets
1. Dissolve one cleaning tablet in water at 60 – 70°C.
2. Pour the solution into the jug .
3. Move the jug slowly in circular motions to ensure that the inside is wetted with the cleaning
solution.
4. Let the cleaning solution take effect for a few minutes.
5. Empty the jug and rinse it thoroughly several times with clear water.
Caution! The BEEM cleaning tablets do not have any descaling effect!
EN

Publicidad

Tabla de contenido

Solución de problemas

loading

Tabla de contenido