Acqua Brevetti PuliFIL FT010 Instrucciones De Instalacion Y Uso página 27

Filtro auto-limpiante semi-automatico
Ocultar thumbs Ver también para PuliFIL FT010:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Warning! It is necessary to install the filter following the water flow direction indicated by
the arrow stamped on the brass head of the filter. In case of installation with water inlet on
the right, the label with technical data would stay behind the filter (facing the wall).
Warning! The discharge pipe of the washing water of the filter must not be attached to the
filter. The drain of the filter must be placed at a minimum distance of 20 mm from the drain.
It can also be placed a bucket with suitable capacity under the drain.
Any other arrangement may cause the non proper operation of the device.
In case of doubt contact with Acqua Brevetti SRL (Tel.: +39.049.8973432 or send an e-mail to
servizi@acquabrevetti.it
PULIFIL - ENGLISH
)
MAN125 PAG.EN-12

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Pulifil ft012Pulifil ft014Pulifil ft016Pulifil ft018

Tabla de contenido