Compatibility And Height - Permobil Compass Power Mount Hardware Operación Manual

Compatibility and Height

Compass Power Mount Hardware is compatible with the wheelchairs listed below, using only the seating
systems specified. The power bases listed are a reference for what is available with the compatible seating
systems.
Permobil
with Corpus 3G Seating
System
M400 Corpus
M300 Corpus
C350 Corpus
F3 / M3 Corpus
F5 / M5 Corpus
Each wheelchair manufacturer has a suggested "back gap" for setting the height of the back support on the
wheelchair. This allows for the power wheelchair components to articulate as intended. Please see the height
guide charts below*.
Note: This section does not apply to the Tru-Shape, for which the back height is measured instead of the "back gap" .
Quantum
POWER
without recline
MOUNT
HEIGHT
Recommended
GUIDE
CC Back Support Length
30"
(76.2cm )
28"
(71.2cm )
26"
22 L
(66.0cm )
24"
20 L
(60.9cm )
22"
18 L
(55.9cm )
20"
16 L
(50.8cm )
18"
14 L
(45.7cm )
16"
12 L
(40.6cm )
POWER
Permobil
MOUNT
HEIGHT
Recommended
GUIDE
CC Back Support Length
30"
(76.2cm )
28"
22 L
(71.2cm )
26"
20 L
(66.0cm )
24"
18 L
(60.9cm )
22"
16 L
(55.9cm )
20"
14 L
(50.8cm )
18"
12 L
(45.7cm )
16"
(40.6cm )
Compass Power Mount Hardware Operation Manual
Quickie
with 3.7 Power Recline
Seating System
QM-710 SC
™
QM-710 MPC
QM-715 HD MPC
™
QM-720 MPD
™
PULSE 6 SC
™
PULSE 6 MPC
Quantum
*Rovi suggested back gap is 4" (10.2cm) for tilt systems and 6"
with recline
(15.2cm) for recline systems. Recommended CC Back Support Length
Recommended
and Adjustment information depends on where the holes are drilled in
CC Back Support Length
the Recessed Planar Interface Plate during installation.
22 L
BACK HEIGHT = Overall dimension from the seat base to the top
20 L
edge of the back support.
18 L
BACK GAP = Manufacturer recommended dimension from the seat
16 L base to the bottom edge of the back support. Recommended gap
is identical for all back supports.
14 L
ADJUSTMENT = Available height adjustment range after
12 L
recommended back gap. (½" increments)
Quickie
Recommended
CC Back Support Length
22 L
20 L
18 L
16 L
14 L
12 L
4
Quantum
with Tru-Balance 3 with Motion Concepts
Seating System Seating System
Q6 Edge
Note: A Recessed Planar
Interface Plate must
Q6 Edge X
be installed on the
wheelchair.
Rival
Seat Base
Rovi
X3
Seat Base