Publicidad
installation guide
STEP 7
Carefully flip the base over onto its legs.
Important: Always use two people when setting up, moving or flipping the
base. Do not drag across the floor. Do not rest frame on its side, excessive
pressure may damage the legs.
STEP 8
WARNING
Always unplug the base from the electrical outlet before servicing any part of the
base. To reduce risk of electric shock, unplug the base before cleaning.
To safely disconnect, ensure the base is in a flat position with all motors off,
and unplug from power source.
Plug the base into a power
source. A surge protector is
strongly recommended.
For customer support, visit www.ergomotion.com or call: 1-888-550-3746
STEP 9
Ensure batteries are correctly installed in the back of
the remote.
Quickly test functions to verify proper setup before
placing mattress on base. Press FLAT to return the
base to a flat position.
STEP 10
Insert each end of the mattress retainer bar into the holes at the foot
of the base. Make sure the bar is secured.
Setup is now complete! Test all functions on remote.
9
Publicidad
