Publicidad
headboard bracket installation guide (optional)
A 9/16" & 1/2" socket and crescent wrench are necessary to complete installation.
STEP 1
Attach the Headboard Bracket.
a .
Align the hole in the bracket to
the brass sleeve into which the
leg threads. Hold the bracket
in place and screw the leg into
the base until it is snug. DO NOT
OVERTIGHTEN. Too much force
may cause the leg to spin freely.
b.
Align the tab with the hole in
the frame (located towards
the foot of the base) and use a
short bolt and nut to secure the
bracket. Make sure the bolt is
tight.
STEP 2
Attach the plastic spacer and T-Bracket.
a . Measure the distance between the mounting holes on the
headboard and install the T-Bracket to accommodate the
headboard.
b. To install the T-Bracket, slide the T-Bracket through the end of the
headboard bracket. Align the flat side of the T-Bracket plate to the
mounting holes on the headboard.
14
Headboard Brackets are an optional accessory and are not included.
c . Secure T-Bracket in place by inserting two short screws through
top of bracket. Use hex key to tighten screws.
STEP 3
Connect your headboard to the attachment
plate using the remaining long screws or
hardware that came with your headboard.
The heads of the bolts will face outward. Use
hex key to tighten bolts.
Publicidad
