Publicidad
troubleshooting
•
Check under the bed base to verify that the wired connections are secure and that there are no cords or bedding obstructing
the movement of the base.
•
Check to ensure the LED light is illuminated on the control box. If there is no light, verify that the input and power cords are
properly connected.
•
Unplug the base for 1 hour to reset the electronic components.
•
Plug bed base into a different electrical outlet, or test current outlet with another working appliance (a grounded, electrical
surge protector is recommended).
•
Remove and replace batteries in the remote control and re-pair the remote to the base (see page 11).
•
If issue is not resolved by following the instructions above, locate serial number on warranty card, manual or back of remote
and call.
If one or more functions on the bed base have stopped operating:
Ergomotion Customer Service: US 1-888-550-3746
15
Publicidad
