Machine Breakdown/Transportation - Amano American Sanders 3DS Manual Del Operador

EN
To break down the machine, follow this procedure:
1. Unplug machine from wall and wrap cord.
WARNING:
Injury to the operator or bystanders could occur
if the power supply remains connected when
servicing the equipment, changing abrasive, or
empting the dust bag.
2. Unplug the power cord, motor cord, and vacuum from electric box.
3. Disconnect the vacuum hose from the sanding unit.
4. Remove both hand knobs from the sanding unit and
separate sanding unit from truck frame.
(see Figure 2)
WARNING:
The sanding unit is heavy (109 lbs.). To avoid
injury to the operator or damage to the machine
use a firm grip and proper lifting technique. Get
assistance if necessary.
5. To lift the sanding unit grasp the assembly at the lifting sites. (see Figure 3)
6. Unwrap the vacuum power cord from the cleats on the handle and
place on vacuum head.
7. Disconnect the vacuum straps by unhinging the draw latch. The
vacuum strap will spring back and the vacuum can be lifted off the
truck frame. (See Figure 4)
8. The handle may be taken off by removing the four
5/16-18 bolts and nuts that secure it to the truck frame.
9. Secure all elements in cargo area when transporting to avoid
damage to the machine.
How to Move Machine (Room to Room)
When moving the machine short distances (room to room) it may be moved
by tilting it back until the 4" diameter wheels contact the floor. With steady
downward pressure on the handle the machine can be pushed to the desired
location. (see Figure 5)
All manuals and user guides at all-guides.com

Machine Breakdown/Transportation


8
Figure 2
Figure 3
Figure 4
Figure 5