Cleaning And Maintenance - MPM MKR-04M Instrucciones De Funcionamiento

3. To prevent food from sticking to the slicer and make cutting easier, moisten the cutter disc
with a damp cloth.
4. Connect the appliance to the mains.
5. Place food on the moving slider ❺, between the blade of the cutter disk ❸ and the press ❻.
6. Press the power switch lock button ❿ toward the power switch ❾ and turn on the power
with the power switch ❾ at the same time. The slicer will run. Release the button (9) to stop
the slicer.
CAUTION! Do not operate the slicer for more that 10 minutes. If you want to use the slicer longer, first stop and
leave it for at least 30 minutes.
7. Keep moving the slider ❺ forward and backwards while pressing food to the cutter using
the press ❻.
IMPORTANT! Always use the press ❻ when cutting small pieces of food.
IMPORTANT! Fresh bread can be difficult to cut. Move bread slices away as they are cut. Never cut hot bread.
8. When done slicing, unplug the power cord from the mains. Next, clean the slicer.

CLEANING AND MAINTENANCE

CAUTION! You can tilt the slider ❺ up to clean the slider more easily.
1. Always unplug the appliance from the power outlet before cleaning.
2. Clean the appliance with a soft damp cloth or a paper towel.
3. Do not immerse the appliance in water or other liquids.
4. The cutter disc can be removed for cleaning. To do this, turn the knob ❹ in the centre of the
cutter disc 90 degrees clockwise. The knob handle becomes accessible for use when you
press the centre of the knob. Reinstall the cutter disc in the reverse order of the disassembly.
Do not wipe with any sharp cloths that could scratch the surface.
5. Dry all the cleaned parts thoroughly.
6. The cutter blade ❸ and food press ❻ can be washed in water with detergent, but remem-
ber to disassemble these components from the slicer first.
9