Technical Data; Vibration Information - Worx WP165E Manual Original

TECHNICAL DATA

Type WP165E WP165E.X (1-designation of
machinery, representative of Battery- powered
Lawn Trimmer)
Voltage
No load speed
Cutting diameter
Line diameter
Machine weight
** Voltage measured without workload. Initial battery
voltage reaches maximum of 20 volts. Nominal voltage
is 18 volts.
*** X=1-999, A-Z, M1-M9 there are only used for dif-
ferent customers, there are no safe relevant changes
between these models
Category
WA3551
20V Battery
WA3551.1
WA3760
20V Charger
WA3880
We recommend that you purchase your accessories
from the same store that sold you the tool. Refer to
the accessory packaging for further details. Store
personnel can assist you and offer advice.
NOISE DATA
A weighted sound pressure
K &K
pA WA
A weighted sound power
Wear ear protection

VIBRATION INFORMATION

Vibration emission value
2-in-1 Grass Trimmer/Edger
WP165E WP165E.X***
20V MAX**
7600/min
30cm
1.65mm
2.0kg
Type Capacity
2.0Ah
2.0Ah
2.0A
2.0A
L = 74dB(A)
pA
3.0dB(A)
L = 90dB(A)
wA
a <1.8m/s²
h
Uncertainty
The declared vibration total value may be used for
comparing one tool with another, and may also be
used in a preliminary assessment of exposure.
WARNING! The vibration emission value during
actual use of the power tool can differ from the
declared value depending on the ways in which the
tool is used dependant on the following examples and
other variations on how the tool is used:
How the tool is used and the materials being cut or
drilled.
The tool being in good condition and well maintained.
The use the correct accessory for the tool and
ensuring it is sharp and in good condition.
The tightness of the grip on the handles and if any anti
vibration accessories are used.
And the tool is being used as intended by its design
and these instructions.
This tool may cause hand-arm vibration
syndrome if its use is not adequately managed.
WARNING! To be accurate, an estimation of
exposure level in the actual conditions of use
should also take account of all parts of the operating
cycle such as the times when the tool is switched off
and when it is running idle but not actually doing the
job. This may significantly reduce the exposure level
over the total working period.
Helping to minimize your vibration exposure risk.
ALWAYS use sharp chisels, drills and blades.
Maintain this tool in accordance with these
instructions and keep well lubricated (where
appropriate).
If the tool is to be used regularly then invest in anti
vibration accessories.
Plan your work schedule to spread any high vibration
tool use across a number of days.
ASSEMBLY AND OPERATION
NOTE: Before using the tool, read the
instruction book carefully.
Intended Use
The machine is intended for the cutting of grass and
weeds under bushes, as well as on slopes and edges
that can not be reached with the lawn mower.
WARNING! The charger and battery pack are
specially designed to work together so do not
attempt to use any other devices. Never insert or
allow metallic objects into your charger or battery
pack connections because of an electrical failure and
hazard will occur.
K = 1.5m/s²
13
EN