ECOVACS DEEBOT X1 PLUS Manual De Instrucciones página 28

No. Malfunction
There is debris in the Dust
15
Container.
DEEBOT leaks dust or
16
debris while cleaning.
Air Freshener makes an
17
abnormal noise.
DEEBOT does not respond
18
to the Station instruction.
Driving wheels are
19
blocked.
DEEBOT OZMO
TM
3.0 Oscillating Mopping
20
System drops out of the
place during use.
DEEBOT is stuck when
cleaning with OZMO
21
3.0 Oscillating Mopping
System installed.
EN 28
Possible Causes
Fine particles are absorbed inside the Dust
Container through the Dust Bag.
The Dust Bag is damaged.
The Dust Disposal Port is stuck by debris.
Objects have fallen into the Air Freshener.
DEEBOT is too far away from the Station.
DEEBOT and the Station are not paired.
Driving wheels are blocked by foreign objects.
Pro
The OZMO Pro 3.0 Oscillating Mopping
TM
System is not correctly installed.
DEEBOT may have difficulty climbing over
Pro
TM
obstacles when using OZMO
Oscillating Mopping System.
Clean the Dust Container Lid and inner wall.
Check the Dust Bag and replace it.
Uninstall the Auto-Empty Dust Bin and clear the debris.
Please contact Customer Service for assistance.
If it is beyond the available distance, the ECOVACS HOME
App can also be used to operate DEEBOT.
Unplug the Station plug and wait for 10 seconds to reinsert
the plug. Manually push the robot up to the Station, and
ensure that the charging pins are correctly connected.
Then, DEEBOT will start charging, and voice prompt
pairing successful.
Please rotate and press the driving wheels to check
whether there is any foreign object wrapped or stuck. If
there is any foreign object, please clean it in time. If this
problem persists, please contact Customer Care for help.
Make DEEBOT OZMO
System clicks into place when installing.
Pro 3.0 Please assist DEEBOT if there is a problem.
TM
Solutions
Pro 3.0 Oscillating Mopping
TM