IO Mabe IWO19JSPFSS Instructivo Y Advertencias página 13

IMPORTANT NOTES
When removing french doors:
• Read the instructions all the way through before
starting.
CAUTION
Lifting Hazard.
Single person lift can cause injury. Use assistance
when handling, moving or lifting the refrigerator
doors.
NOTE: When moving door, to prevent damage to
door and electronics carefully place the door in a
proper location.
WARNING
To eliminate the risk of electric shock or injury
during installation, you must first unplug the
refrigerator before proceeding. Failure to follow
these instructions can result in electrical shock.
1 REINSTALLING CENTER HINGE
BRACKETS AND HINGES
Using a 5/16" (7.9mm) socket/ratchet driver,
A
reinstall the bolts and center hinge brackets to
the cabinet.
Using a 1/4" (6.4mm) Allen wrench, reinstall
B
the 2 hinge pins into the hinge brackets.
REHANGING THE RIGHT DOOR
2
A
Lower the refrigerator door onto the right
hinge pin.
Make sure the door is aligned with the
B
cabinet. Attach the hinge to the top of the
cabinet loosely with bolts removed earlier.
Make sure the gasket on the door is flush
C
against the cabinet and is not folded. Tighten
the bolts to 60lb-in (6.78Nm).
Replace the right hinge cover on top of the
D
refrigerator using a Phillips screwdriver.
REHANGING THE LEFT DOOR
3
A Pass the wire through the slot in the hinge.
Place the hinge pin into the top of the door.
Lower the refrigerator door onto the left
B
hinge pin.
Make sure the door is aligned with the
C
cabinet. Attach the hinge to the top of the
cabinet loosely with bolts removed earlier.
Make sure the gasket on the door is flush
D
against the cabinet and is not folded. Tighten
the bolts to 60 lb-in. (6.78 Nm).
Plug the wire connectors together and rout
E
the wire inside the plastic port.
Replace the left hinge cover on top of the
F
refrigerator using a Phillips screwdriver.
13