Kingston IronKey Vault Privacy 80 ES Manual Del Usuario página 21

3. Tap Back from upper left after selecting ENABLE and exit.
4. Your VP80ES will show a "USER HAS BEEN SET" prompt upon successful creation of the
user. Tap Enter key.
5. Your VP80ES will go back to the Admin menu. Proceed to connect the VP80ES to confirm
your setting and then lock, and power off. On the next power on, the User selection will be
available.
Note: The password for this User profile will be set when the drive is next plugged into a workstation and
the User option is selected for log in. Detailed steps for the user profile configuration are below. The User
login will have its own User menu. For detailed information, see
Step-by-step Process for User Configuration
1. Plug your drive into the computer.
2. Tap USER when prompted to select login mode.
3. Tap OK on the "PLEASE CREATE YOUR PASSWORD" screen.
4. Enter desired password on the "ENTER NEW PASSWORD" screen. Tap the Enter key.
5. Confirm the new password and tap the Enter key. You must confirm using the same
password you entered in Step 4.
6. Tap CONNECT to connect the VP80ES instantly or wait for 10 seconds for VP80ES to
automatically connect to your computer.
©2022 Kingston Technology Corporation. All rights reserved. All trademarks and registered trademarks are the property of their respective owners.
IronKey VP80ES External SSD User Manual – Rev. 1.0
Using the User Menu.
20