Auto-Lock Time; Brightness - Kingston IronKey Vault Privacy 80 ES Manual Del Usuario

Auto-Lock Time

This feature can be enabled by the Admin or the User. AUTO-LOCK TIME will disconnect the drive once it
is idle (i.e. zero activity) for the configured amount of time. The amount of idle time required to time out
the drive is configurable from 5 minutes to 12 hours.
To enable auto-lock, follow these steps:
1. Tap AUTO-LOCK TIME from the Admin menu.
2. Configure the desired number of minutes the drive can remain unlocked and idle.
NOTE: You can increase or decrease this limit in increments of hours and minutes.
3. Tap ENABLE.
4. Tap Back from the upper left to save and exit to the Admin menu.
Note: The default AUTO-LOCK TIME is Disabled.

Brightness

Your VP80ES screen brightness can be adjusted via this feature.
To change the value, follow these steps:
1. Tap the BRIGHTNESS option from the Admin menu
2. Tap + to increase the brightness and - to decrease the brightness.
NOTE: The minimum BRIGHTNESS is 1 and the maximum is 30.
3. Tap Back from the upper left to save and exit to the Admin menu.
©2022 Kingston Technology Corporation. All rights reserved. All trademarks and registered trademarks are the property of their respective owners.
IronKey VP80ES External SSD User Manual – Rev. 1.0
24