Publicidad
Idiomas disponibles
Idiomas disponibles
All manuals and user guides at all-guides.com
Setting Up The System Programming Features:
Bank 1 Transmitter Channels
Start with the system disarmed, tun the ignition switch to the on position then:
1) Press and release the push button valet/program switch 3 times.
Siren Chirps once and or Lights flash one time indicating the transmitter program mode
successfully entered.
See Owners Manual for transmitter programming.
Turn the ignition switch off then on to access Bank 2 Keyless/Alarm feature selections.
1 short/1 long chirp when the key transitions off, followed by 1 short/1 long chirp when the
key is turned on indicates that you are in feature selection of bank 2.
Press the push-button switch:
1 time to access the first selection as shown below. Use the lock button of the transmitter to
change the feature selection or press the push-button to advance to the next selectable
feature.
Bank 2
Feature
1 Chirp/Flash 2 Chirp/Flash 3 Chirp/Flash 4 Chirp/Flash
1
st
Door L/UL
1 Sec.
3.5 Sec.
2
nd
Accy Lock
On
Off
3
rd
Accy Unlock
All Doors
Off
4
th
Passive Locks
Passive
Active
th
5
Passive/Active Arm Passive
Active
6
th
Siren/Horn
Both
Siren
th
7
Horn Chirp
10ms
16ms
8
th
Override Method
Custom Code Valet
9
th
Chp Del From TX On
Off
10th Parking Lights
Normal
On w/Lock
When finished setting the keyless/alarm selectable features, turn the ignition off then on to
advance to Bank 3, Remote Start Selectable Features.
No reaction when the key transitions off and 2 long Chirp when the key transitions on.
Press the push-button switch one time to access the first selection as shown below. Use the
lock button of the transmitter to change the feature selection or press the push-button to
advance to the next selectable feature.
5 Chirp/Flash 6 Chirps/Flash
1 S.L, Dbl.U/L Dbl L, 1 S. UL
Dbl L, Dbl UL 1S L/350ms UL
Horn
30ms
40ms
50ms
On w/ UL
On w/L&UL
11
Default
1 Sec.
Off
Off
Active
Active
Both
16ms
Valet
Off
Normal
128-9104
11 of 32
Publicidad
