Troubleshooting - Datalogic GRYPHON BT Serie Guía Rápida

UK/US

TROUBLESHOOTING

PROBLEM
A beep or a LED blink signals an interruption of the radio communication with
the remote Bluetooth
SOLUTION
•
It is possible that the distance from the remote Bluetooth
more than 10 m or that an obstacle interrupted the communication.
•
Restart the radio communication.
PROBLEM
The reader is Master and is not able to initialize radio communication with the
remote Bluetooth
SOLUTION
•
Put the reader near the remote Bluetooth
radio communication again.
•
Make sure that:
- the remote Bluetooth
- the protocol version is compatible with Gryphon™ BT's protocol;
the remote Bluetooth
-
BT device with the same SPP.
•
Repeat the remote Bluetooth
•
Display Gryphon™ BT configuration by placing the reader on the
C-GRYPHON and sending the Transmit Configuration command.
14
®
device.
®
device Slave.
®
®
®
device and try to initialize the
device is powered;
device is not already connected to another
®
device address procedure.
DATALOGIC
®
device is