1. Safety Information
Warning
Special attention shall be paid when using the meter, improper
use might cause an electric shock or damage the meter. General
safety procedures shall be followed during the use and safety
measures regulated by the instruction manual shall be
completely respected.
To fully make use of the functions of the meter and ensure safe
operation, please carefully read and follow the use method of
this manual.
The meter meets IEC-61010-1, IEC-61010-2-030, IEC-61010-2-03)
Safety Requirements for Electronic Measuring Instruments, of
the secondary pollution, over-voltage standard is CATIII 600V.
Please follow the safe operation guidance and ensure to use the
meter in safe.
1.1. Preparations
When use the meter, users must comply with the standard safety
rules:
- General protection against electric shock
- Prevent misuse of the meter
After received the meter, check if it has been damaged during
the delivery.
After been kept and delivered in shoddy conditions, check and
confirm if the meter is damaged or not.
The pen-shape meter must be in good condition. Before use,
check the pen-shape meter see if any damage to the insulation,
if the metal wire of the cable is bare.
28