Measurement Preparations; Non-Contact Voltage Detection (Ncv) - Sofamel CTL-600 Manual De Instrucciones

Operation Guide
2） Press any key after auto power off to wake the meter into
working status.
3） When turn the meter on, hold the "NCV" key at the same
time, then the auto power off function is canceled.

4.4. Measurement Preparations

1） Turn the transfer switch, turn on the power. If the battery
voltage is low (of about ≤2.4V), the LCD will show "
symbol, then the battery shall be replaced.
2） When the meter has not entered into measurement, it will
automatically enter into the status of automatic scan, the
meter displays as the following diagram shows.

4.5. Non-contact Voltage Detection (NCV)

1) Press NCV key for 2s, enable NCV function, the meter
displays.
37
"