Waeco MAGIC WATCH MWE-150-2DIS Instructions De Montage Et De Service página 40

MWE-150-2DIS.book Seite 40 Mittwoch, 29. Juni 2005 5:20 17
All manuals and user guides at all-guides.com
Installing MAGIC WATCH
6.4 Fastening the control electronics
Note the following information when selecting a place to fit the control elec-
tronics:
Note the length of the sensor cables.
The control electronics may not be damaged if you have luggage or
objects in the boot.
➤ Fasten the control electronics to a suitable place in the boot.
The control electronics should not be exposed to any moisture.
The polarity of the socket cannot be reversed: They can be only
be plugged into the connection in one way.
➤ Plug the cable sensor's sockets into the connections on the control elec-
tronics (see fig. 15 B, page 8).
Make sure the locking pin catches.
6.5 Fastening the display
Note the following information when selecting a place to fit the display:
Note the length of the display cable.
Note that the boot cover swings upwards on vehicles that have a big tail-
gate.
The display must be easily visible when you are reversing.
The display must not be covered or damaged by any objects placed on
the boot cover.
Fit the display so that there is no danger of injury, for example when
sharply braking.
Its compact design means it can be fitted in many places in the vehicle.
40
magic watch