Descargar Imprimir esta página

Intended Use; 10.1 Non-Permitted Fluids; 10.2 Use - Piusi SQUALO Instrucciones De Instalación, Uso Y Mantenimiento

Publicidad

Idiomas disponibles

Idiomas disponibles

Installation, use and maintenance
10

INTENDED USE

CAUTION

10.1 NON-PERMITTED FLUIDS

FLUIDS NON-
PERMITTED
AND
RELATED
DANGERS

10.2 USE

INTENDED
USE AND
CHARACTER-
ISTICS
ATTENTION
USE RESTRIC-
TIONS, UNIN-
TENDED BUT
REASONABLY
PREDICTABLE
USE
ATTENTION
10 /52
The pump has been certified for use with water only. However, it has been
designed to deliver AUS32 (DEF, Ad-Blue®), partially or totally immersed in the
fluid. To guarantee the correct use and the declared performance of the pump,
any tampering is forbidden
- DIESEL FUEL
- PETROL
- INFLAMMABLE LIQUIDS
- CORROSIVE CHEMICAL
PRODUCTS
- SOLVENTS
- FOOD LIQUIDS
The submersible pumps SQUALO have been designed and fabricated for
AUS32 (DEF, AdBlue®) delivery systems. The pump is provided with:
- Regenerative turbine actuated by a proper electrical motor
- Pressure regulator
- A check valve to prevent the discharge pipe from being delivery
- Electronic board with timer functionality
- Technopolymer pump body
- Stainless steel tube to hold the stator
- An aluminum bottom for motor cover
- A cable clamp for locking the incoming electric cable and to avoid tearing
it in case of accidental draft
- A half-moon collector for fluid delivery and fitting with retaining fork
A range of accessories are provided optionally (resistive level sensors)
ANY USE OUTSIDE THE ABOVE DESCRIPTION IS NOT PERMITTED BY
THE MANUFACTURER
It is forbidden:
1 - To use the pump for operations other than its intended use
2 - To run the pump dry
3 - To use the pump in a configuration different from the one defined by the
manufacturer
4 - To use the pump with performances different from the one defined in the
paragraph "TECHNICAL DATA"
5 - To use the pump in hazardous area/classified zones (the machine does not
comply with the Directive 2014/34/UE ATEX)
6 - To add systems or equipment not planned by the manufacturer in the
executive project
7 - Connect the pump to sources of energy other than those prescribed by
the manufacturer and reported in the instructions for use;
8 - To run the pump without having read and fully understood the user manual
9 - To run the pump to deliver other fluids than the permitted ones
10 - To partially or totally tamper the pump
Any other use that differs from the intended use of the pump is considered
"EQUIPMENT MISUSE", therefore the manufacturer declines any
responsibility in case of accident or damages to property and injury to person
or animals
- OXIDATION OF PUMP
- FIRE
- EXPLOSION
- CORROSION AND INJURY
TO PERSONS
- DAMAGE TO GASKET SEALS
- FLUID CONTAMINATION
M0629

Publicidad

loading