Publicidad
Idiomas disponibles
Idiomas disponibles
(translated from italian)
11
INSTALLATION
ATTENTION
PRELIMINARY
INSPECTION
WARNING
Authorized
installation
personnel
ATTENTION
This manual is the property of PIUSI S.p.A. Any reproduction, even partial, is forbidden.
The pump must never be operated before the delivery lines have been connected.
Installation is an operation that may be of some complexity. It must be carried out by
qualified and authorized installers.
Make sure that there is no danger of toxic fumes or harmful gases in the working
atmosphere. In case of welding operations use all precautions to avoid explosions.
Keep in mind the danger of infection and the hygiene and sanitary precautionary
rules.
- Verify that all components are present. Request any missing parts from the manufacturer.
- Check that the pump has not suffered any damage during transport or storage.
- Carefully clean the delivery outlet, removing any dust or other packaging material that
may be present.
- Check that the electrical data corresponds to those indicated on the data plate.
All installations must be carried out by Authorized and competent personnel only.
Authorized persons must
- ensure the correct installation of equipment required for the correct functioning of the
pump;
- only use accessories that have been supplied with the system.
The use of accessories that are unsuitable and were not provided with the system
is strictly prohibited. Piusi S.p.A. accepts no responsibility for damage to persons,
property or the environment caused by failure to comply with this requirement.
THE PUMP IS FOR PROFESSIONAL USE ONLY.
Motors are not explosion-proof. DO NOT install the system in places with danger of
explosion.
ISO 22241 provides the AUS32 (DEF, AdBlue®) requirements including:
1) quality of AUS32 (DEF, AdBlue®) solution,
2) applicable test methods,
3) packaging transportation and storage requirements and
4) refilling interface requirements.
AUS32 (DEF, AdBlue®) solution must be:
- HANDLED AND STORED IN COMPATIBLE MATERIAL;
- KEPT FREE OF CONTAMINATION;
- STORED AT TEMPERATURES THAT WILL NOT CAUSE THE SOLUTION TO
DETERIORATE.
The use of contaminated or out of specification AUS32 (DEF, AdBlue®) can cause
filter problems, clogged injectors, deterioration of the selective catalytic reduction
process, or poison the vehicle's catalytic converter used in the exhaust system.
AUS32 (DEF, AdBlue®) manufacturers may require a system inspection to insure that
all components are AUS32 (DEF, AdBlue®) compatible and that the tank and system
have been properly cleaned, rinsed, and flushed before AUS32 (DEF, AdBlue®) is
delivered.
The tank in which the pump is being installed must be vented in accordance with
manufacturer's installation instructions. Follow the tank manufacturer's tank
installation instructions.
- Make sure that the tank is free from sand, dirt, and other debris.
- Cable extension junctions should only be made with a safe and waterproof system.
SUBMERSIBLE PUMP
11
11 /52
/124
Publicidad
