Surround - Denon AVR-1602 Instrucciones De Operación

13 SURROUND

Before playing with the surround function
• Before playing with the surround function, be sure to use the test tones to adjust the playback level from each
speakers. This adjustment can be performed from the remote control unit, as described below.
• The adjustment with the test tones is only effective in the DOLBY/DTS SURROUND modes.
The adjusted playback levels for the different surround modes are automatically stored in the memory of each
surround modes.
1
Set the DOLBY/DTS SURROUND (Dolby Pro
Logic II or Dolby Digital or DTS Digital) modes.
SURROUND
MODE
(Main unit) (Remote control unit)
2
Press the TEST TONE button.
T.TONE
RETURN
(Remote control unit)
Test tones are output from the
different speakers. Use the
channel volume adjust buttons
to adjust so that the volume of
(Remote control unit)
the test tones is the same for
all the speakers.
NOTE: Please make sure the "AUDIO" position
of the slide switch on the remote control
unit.
• After adjusting using the test tones, adjust the channel levels either according to the playback sources or to
suit your tastes, as described below.
1 Select the speaker whose level you want to
adjust.
(Main unit) (Remote control unit)
The channel switches as shown below each time
the button is pressed.
FL CNTR FR SR SL
SW
NOTE: Please make sure the "AUDIO" position
of the slide switch on the remote control
unit.
2 Adjust the level of the selected speaker.
(Main unit) (Remote control unit)
All manuals and user guides at all-guides.com
SURROUND
·
MODE TAPE VCR
1
6 7
CHANNEL
0
3 2 0
VIDEO SELECT CD·MD/CDR·DVD/VDP DISC SKIP+
TITLE
8 3 9
2
6
2
SYSTEM SURROUND
SET UP MENU MASTER
CH SELECT
2, 3
SELECT
T.TONE STATUS MUTING
1
RETURN DISPLAY
2
CHANNEL TV VOLUME
3
After completing the adjustment, press the
TEST TONE button again.
T.TONE
RETURN
(Remote control unit)
B
2 1
VIDEO SELECT CD·MD/CDR·DVD/VDP DISC SKIP+
TITLE
8 3 9
2
6 7
2
SYSTEM SURROUND
SET UP MENU
MASTER
CH SELECT VOL
1
SELECT
T.TONE STATUS MUTING
2 RETURN DISPLAY
CHANNEL TV VOLUME
The level of the selected speaker can be adjusted
within the range of +12 to –12 dB using the
SELECT (up and down) buttons.
Dolby Surround Pro Logic
1
Select the function to which the component you
want to play is connected.
(Main unit) (Remote control unit)
2 Select the Dolby Surround Pro Logic II mode.
Select the DOLBY The surround mode
PRO LOGIC II mode switches when the
using the SELECT SURROUND MODE
buttons. button is pressed.
Select the DOLBY
7
PRO LOGIC II mode.
VOL
(Main unit) (Remote control unit)
• The Dolby Pro Logic indicator lights.
Display
DOLBY PLII
PLII C DVD
3
Play a program source with the
mark.
• For operating instructions, refer to the manuals
of the respective components.
4 Select the surround parameter mode.
SURROUND
MODE CINEMA
MENU
(Main unit) (Remote control unit)
To perform this operation from the remote
control unit, check that the mode selector
switch is set to "AUDIO".
5 Select the optimum mode for the source.
(Main unit) (Remote control unit)
MODE PRO LOGIC MODE CINEMA
or
II mode
B
DVD/VDP
3
1
AVR/AVC
ON
OFF
V. AUX
1
SURROUND
INPUT MODE CDR / TAPE
MODE
SURROUND
2 MODE
0
3
VIDEO SELECT
TITLE
6
Light
SYSTEM
SET UP
4, 5, 6, 7
T.TONE
RETURN
REMOTE CONTROL UNIT RC-896
Display
6 Set the surround parameters according to the
mode.
(Main unit)
• The mode switches as shown below each
time the button is pressed.
MODE PRO LOGIC MODE CINEMA
CINEMA EQ
DEFAULT
MODE MUSIC
or
ENGLISH
2 4, 6 2, 5, 7
CD MD/CDR
AUDIO VIDEO
POWER
TV VCR DVD/VDP
CD DVD/VDP
1 2 3
VCR TV/DBS
4 5 6 7
TUNER SHIFT
8 9 0
TAPE · VCR
6 7
CHANNEL
2 0
CD·MD/CDR·DVD/VDP DISC SKIP+
8 3 9
2
7
SURROUND
MENU
MASTER
CH SELECT VOL
SELECT
STATUS MUTING
DISPLAY
CHANNEL TV VOLUME
B
SURROUND
MENU
(Remote control unit)
MODE MUSIC
CINEMA EQ PANORAMA
DEFAULT DIMENSION
CENTER WIDTH
DEFAULT
15