Rointe SYGMA WIDTH 500 STN030SEB2 Manual De Instalacion Y Uso página 10

An installation kit is included in the packaging. Follow the instructions below:
1. Choose the right part of the wall.
2. Place the mounting stencil on the wall, marking the places for the holes.
3. Remove the stencil and make the holes in the wall.
4. Insert the rawl plugs in the holes made.
5. Screw the plastic fastener to the wall with the Ø 5.5 x 50 mm screw.
6. Screw the two brackets for supporting the product and the plastic fastener to the
horizontal tube of the product like in Figure 1 with the Ø 8 x 26 mm screw.
7. Insert what you have assembled in Section 6 into the plastic piece and fix well with the
Ø 5 x 12 mm screw.
8. Place the cover on the piece supporting the product.
Nº. ITEM
1 Ø 10 x 40 mm Rawl Plug
2 Bracket
3 Ø 5.5 x 50 mm Screw
4 Ø 5 x 12 mm Screw
5 Bracket Insert
6 Bracket Head
7 Ø 8 x 26 mm screw
8 Cap
9 Product
10
4
1
2
3
5
8
7
6
9