Manual/Automatic Functions; Manual Function; Automatic Function - Rointe SYGMA WIDTH 500 STN030SEB2 Manual De Instalacion Y Uso

on the keypad. To cancel the two hour boost mode, press the

5.7. MANUAL/AUTOMATIC FUNCTIONS

Press the button to toggle between Manual and Automatic functions. The symbol for the

AUTOMATIC function

MANUAL
This function allows you to change the product
between the COMFORT, ECO and ANTI-FROST
modes and to change the temperature.

5.7.1. MANUAL FUNCTION

This function allows you to vary the temperature by switching the product modes between
COMFORT, ECO and anti-freeze. The icons for COMFORT, ECO and ANTI-FROST will appear
when the temperature changes to the above ranges. Depending on the selected temperature
you will see one of these symbols on the display:
COMFORT
From 19ºC to 30ºC
5.7.2. AUTOMATIC FUNCTION
To start programming, check that it is in the Automatic function, with the display showing
the symbol . If the display shows the symbol
Automatic function, press and hold
STEP 1- Select the COMFORT mode temperature.
The CONFORT mode
between 19ºC and 30ºC with the
flash; press the
and the symbol for the manual
From 7.5ºC to 18.5ºC
will be programmed first. Select the COMFORT mode temperature
and
icon to confirm.
SYGMA ELECTRIC TOWEL RAIL
will appear on the main display.
This function will activate the programming that
has previously been set in the product.
ECO
press
for 3 seconds to enter in programming mode.
buttons. The
button again.
AUTOMATIC
ANTI-FROST
7ºC
to change function. Once in
icon and temperature will
EN
13