Publicidad
Idiomas disponibles
Idiomas disponibles
DC-700ETH/T
3.3.1.1 IP address configuration
ATTENTION: When modifying the IP address it is also necessary to modify the IP address of the unit from the Call
Point or CallPoint Configurator software.
1. Long press and hold on any point in an area free of elements and a circular selection menu will appear.
2. Select Configurations.
3. Enter the administrator password and press OK.
4. Select the
GENERAL
tab.
5. Click
to modify the desired IP addresses.
6. Press
CHANGE
and then
The device will restart.
7. From the public address server PC, start
the Call Point or CallPoint Configurator
software.
8. In the installation structure, edit the
DC-700ETH/T and modify the IP address.
9. Save and send configurations to devices.
Configuration and User Manual. Version 5.2.001
DC-700ETH/T.
YES
to apply the changes.
R+D Department
Configuration and user's manual
3. START-UP
14
Publicidad
