Add/Remove Prerecorded Message Buttons - Optimus DC-700ETH/T Manual De Instalación

DC-700ETH/T

3.3.2.5 Add/Remove prerecorded message buttons

This button allows you to send the pre-recorded message assigned to the selected zones.

To add prerecorded message buttons to an area:
1. Activate the Edit Mode (see section 3.3.2.1).
2. Select the area where you want to add the prerecorded message button.
3. Long press and hold on any point in an area free of elements and a circular selection menu will appear.
4. Select the Add icon.
5. Select the Message icon.
6. The list of available messages appears. In the
column, select the messages you want to add. For each
message you choose, a prerecorded message activation
button will be added to the area.
7. Press OK.

To delete prerecorded message buttons:
1. With Edit Mode activated, long press and hold the button you want to delete.
2. Select the Delete icon.
3. Select YES to confirm deletion.
If you do not wish to perform any further configuration operations on the DC-700ETH/T display, exit the Edit Mode (see
section 3.3.2.1).
Configuration and User Manual. Version 5.2.001
DC-700ETH/T.
Configuration and user's manual
Selected
R+D Department
3. START-UP
Pre-recorded
message activation
button
23