Operating Software; General Operating Instructions - Weidmuller CRIMPFIX ECO Traduccion Del Manual De Instrucciones Originales

5 Operating software
Risk of death due to electric shock!
Only switch on the machine if the mains con-
nection cable is undamaged.
► Switch on the machine see Figure 3.2, 10.
The start screen is shown briefly on the display, see Figure
5.1.
Figure 5.1 Display during the switch on procedure
Then the production menu is automatically displayed, see
Figure 5.2.
Figure 5.2 Production menu
The machine is supplied with the following features:
– Operating language English
– User type User
– Cross-section display mm²
To change the language, see chapter 5.4.
To change the cross-section display, see chapter 5.3.
2859970000/00/02.2022
WARNING

5.1 General operating instructions

ATTENTION
The display can be damaged!
The display can be scratched by unsuitable tools.
► Operate the touch display with your finger or use an
input pen with a silicone head.
► Tap the project on the menu you want to open.
There are a variety of navigation options within the operat-
ing software:
► Tap the home button to switch to
the home page.
Home button
► Tap the double arrow to go back
one level in the current menu.
Back button
► Tap the page display to browse in a
menu.
Whenever numeric entries are required, a numeric keypad
will appear on the display.
37