Control Panel; 11 Display; Lcd Display - Jacuzzi J-460 Manual De Instalación - Uso - Mantenimiento

6
8
7
2
6
5
The time required for initial heat-up will vary depending on the
starting water temperature.
WARNING!
Do not get in the spa until the quantity of disinfectant has not
dropped below the level recommended by the manufacturer
and/or by your retailer.
Always check water temperature carefully before entering spa.

Control Panel

D D
C C
B B
A A
F F
A. Select key: filter cycle programming features.
Press this key to activate/deactivate the circulation pump, un-
less it has been activated automatically by the control software.
B. Cycle key: accesses filter cycle program mode and next cycle.
C. Mode key: switches between standard and economy skim-
ming/heating modes.
D. Display key: displays time of day and initiates time setting
and locking functions.
E. Invert key: inverts the main 4-digit LCD display.
F. Keys ( + ) / ( – ): these sensors display and increase or de-
crease the temperature setting. They also display other pro-
grammable features.
G. Turns waterfall, footwell and logo lights on in unison. Press once
for high intensity; press a second time for medium intensity; press a
third time for low intensity; press a fourth time to turn off. The dis-
played color is changed using the light mode button (H) below.
All manuals and user guides at all-guides.com
11
Flow
10
9
4
3
1
6
E E
AM AM
PM PM
J J
STANDARD STANDARD
I I
H H
G G
1 Electrical box
2 Power supply entrance(s)
3 Pump1
4 Heater
5 Drain valve
6 Pump drain plug(s)
7 Pump 2
8 Circulaiton pump
9 Ozonator (optional)
2
10 Injector (optional, required for Ozonator)

11 Display

H. Light Mode Button: Selects one of 5 color modes for wa-
terfall, footwell, and logo lights.
I. JETS 1 key: controls operation of the pump (On, Off).
J. JETS 2 key: controls operation of pump 2

LCD Display

A B C
I
L
M
A Lock Symbol indicates panel, set temperature, or filter cycle
programming is locked.
B. Heat Symbol: indicates heater is on.
C. Ozone Symbol : it indicates the optional Ozonator is on.
D, E, F, G, H. General Indicators: shows which filtering cycle is
in progress or display specific information on the selected cycle.
I. Appears when the temperature is adjusted.
L. Appears when you set the time.
M. Indicates programmed filter cleaning interval has elapsed.
N. JETS 1 Symbol indicates pump 1 is on. The symbol flashes
during automatic operation.
O. JETS 2 Symbol indicates pump 2 is on.
P. Mode Annunciators: Identify which operation mode is cur-
rently selected.
32
D E F G H
AM AM
PM PM
STANDARD STANDARD
N
O
P