GYS STARTFLASH 120.24 CNT Manual De Uso página 19

User manual
Acid spatter hazard!
• Wear protective goggles and gloves.
• In the event of contact with eyes or skin, rinse with water and
seek medical advice immediately.
Connecting to / Disconnecting from the power supply:
• Disconnect the power supply before connecting or
disconnecting battery terminals.
• The battery terminal that is not connected to the chassis must
be connected first. The other terminal should be connected
to the chassis far away from the battery and the fuel line. The
battery charger must then be connected to the mains system.
• After charging, first disconnect the battery charger from the
mains system, then, remove the chassis connection and finally,
the battery connection, in the order indicated.
Connecting:
• This device must be connected to an earthed mains outlet.
• This equipment is intended to be used in industrial environments
(Class A) and is not intended for use in a residential setting
where power is supplied from the public, low-voltage supply
network. There may be potential difficulties in ensuring
electromagnetic compatibility at these sites due to conducted,
as well as radiated, radio-frequency interference.
Maintenance:
• If the power cable becomes damaged, it must be replaced
with a special cable or assembly; this is available from the
manufacturer or their after-sales service.
• Maintenance work should only be carried out by a qualified
technician.
• Warning! Always disconnect the plug from the power outlet
before carrying out any maintenance work on the appliance.
• If the internal fuse is blown, it must be replaced by the
manufacturer, their after-sales service or a similarly qualified
technician to avoid a safety hazard.
• Remove the cover regularly and blow out the dust. Take this
opportunity to have the electrical connections checked with an
insulated tool by a qualified technician.
• Never use solvents or other aggressive cleaning agents.
• Clean the appliance's surfaces with a dry cloth.
Regulations:
• This device complies with European directives.
• The declaration of conformity is available on our website.
Translation of the original user manual
STARTFLASH CNT
19