Publicidad
Idiomas disponibles
Idiomas disponibles
User manual
Multi-chargers
A function that allows multiple chargers to be use together to increase the power level.
Refer to the SHM - Smart Hub Module (025981) user manual for further details.
To operate normally using a single charger, this feature must be set to OFF.
Information
Product information: name and serial number.
PORTABILITY
Your STARTFLASH is equipped with a USB connection that allows you to broaden the device's functionality by creating customised
configurations on a computer that can then be downloaded to the device via a simple USB key. Customised configurations allow
you to add, delete or modify charging modes and profiles meaning your charger can be tailored to suit your needs.
Importing a new configuration:
This feature allows you to download a new configuration (.sfc file) to the charger from the USB key.
Customised configurations
List of modes and profiles that can be customised:
CHARGING MODE
Charging
Charging type
profiles
(normal)
AGM
Liquid
Easy
Pb-CHARGE
Boost
Recovery+
Ca-Ca
recovery
Translation of the original user manual
Charging voltage
2.40 V / cell
Charging profile for gel, MF, EFB, SLA lead-acid batteries.
Charging profile suitable for most AGM lead-acid batteries, including stop-start.
2.45 V / cell
However, some AGM batteries require a lower charging voltage (normal profile). If in doubt,
please refer to the battery's manual.
2.45 V / cell
Charging profile for open lead-acid batteries with cap.
A specific charging profile for lead-acid batteries that automatically adapts the charging
current according to the battery's size.
2.40 V / cell
However, using the normal, AGM or liquid charging curves is advised wherever possible for
the best possible charging process.
Maximum current charging profile for lead-acid batteries. This profile can be used for
ultra-fast charging.
2.42 V / cell
Warning: This type of charging should be done only occasionally, so as not to
shorten the battery's working lifespan.
Specific recovery charging profile for heavily damaged, lead-acid batteries. The battery
must be removed from the vehicle to avoid damaging the vehicle's electronics and it should
2.40 - 2.50 V / cell
take place in a well-ventilated area.
Warning: Recovery voltage up to 4.0 V / cell.
Specific recovery charging profile for recovering calcium batteries. The battery must be re-
2.45 - 2.66
moved from the vehicle to avoid damaging the vehicle's electronics and it should take place
V / cell
in a well-ventilated area.
Warning: Recovery voltage up to 2.75 V / cell.
STARTFLASH CNT
29
Publicidad
