Troubleshooting; Product Information - Vornado 723DC Manual Del Propietário

TROUBLESHOOTING

PROBLEM POSSIBLE CAUSE AND SOLUTION
The unit fails to power on. Unit is not plugged in. Plug Power Cord into electrical outlet. Ensure the AC power cord is plugged into
the power supply and ensure DC power cord is plugged into the circulator.
Ensure unit fan speed setting is selected.
Unit is damaged or in need of repair. Cease usage and unplug. Contact Consumer Service for assistance.
The outlet is worn or damaged. Try another outlet or contact a qualified electrician.
Airflow is weak or slow. Unit set to a low speed setting. Adjust to a higher speed setting.
Airflow is blocked. Remove obstruction.
Adjust direction of airflow towards the user.
GFCI has tripped. Under certain conditions, it is possible for a reset GFCI (Ground Fault Circuit Interrupter) outlet to trip
when the user is changing speeds on a Vornado circulator. In this event, change to an outlet that is not
connected to a GFCI device. It could also indicate a weak or defective GFCI outlet. Contact a qualified
electrician to check the GFCI outlet.
8 English
All manuals and user guides at all-guides.com

PRODUCT INFORMATION

Model(s):
Description
Input Voltage
Mains Voltage Frequency
Protection Class
Dimensions
Weight
Fan Power Input
Maximum Fan Flow Rate
Service Value
Standby Power Consumption
Emitted Sound Level
Maximum Air Velocity
Measurement Standard For
Service Value
Contact Details For Obtaining
More Information
* values are for the 723DC fan and the supplied DC
power transformer combined.
723DC-EU
Symbol Unit Value*
V 100-240
Hz 50/60
Class IPX0
W x H x D 42 x 38 x 42
(cm)
Approx. (g) 4,720
P Watts (W) 62.18
F m /min 53.07
3
SV (m /min)/W 0.85
3
P Watts (W) 0.00
SB
L dB(A) 65.03
WA
c m/sec 5.42
IEC 60879: 1986 corr(1992)
GB/T 13380-2007
Vornado Air LLC
415 East 13th Street
Andover, KS 67002 USA
English 9