Kroeplin F102 Manual De Instrucciones página 22

Function
Returning into the
measuring mode
Selecting a better scale interval
Start SETUP
RES
Adjust scale
interval
Change scale
interval
Returning into the
measuring mode
Key lock ON / OFF
LOCK
Adjustment
Switch on the key
lock
Select last
measuring mode
Basic Action
3x
4x
2x
Result
The gauge shows now the measuring
values in INCH
Note:
After changing the unit the tolerance limit
must be checked again, as the limit will
rounded automatically to the new unit.
Example: from 0,01mm to 0,02mm
SETUP Menu can be started within every
measuring mode
The last used scale interval will be shown
By pressing the MODE key again the
scale interval of 0,01 will appear.
Scale interval of 0,02mm will be shown
Note:
After changing the scale interval the toler-
ance limit must be checked again, as the
limit will rounded automatically to the
new scale interval.
The last adjustment will be shown
Only ON / OFF and data transfer is active.
On forbidden actions „LOCK" will appear
in the display.
22
Remarks