RADEMACHER RolloTube S-line Instrucciones De Servicio página 11

EN EN
There is also a risk of fatal injury from crushing resulting from uncontrolled starting of the drive.
• Never attempt to manually stop the motor/shutter in the event of uncontrolled movement.
• In such cases, switch off all power to the drive and take appropriate safety precautions to prevent
any further start-up.
• Arrange to have the system checked by a skilled electrician.
Exceeding the maximum permissible running time (KB = transient operation) may overload
the tubular motor.
• The maximum permissible running time for a run may not be exceeded when the equipment is in
operation. For this reason, the tubular motor has a running time limit (KB = transient operation) of
four minutes.
• If the running time limit is triggered, then the tubular motor must be left for at least 20 minutes to
cool down.
Incorrect use leads to an increased risk of injury.
• Train all people to safely use the tubular motor.
• Do not allow children to play with fixed controllers and keep remote controls away from children.
• Cleaning and user maintenance may not be carried out by children without supervision.
For roller shutters:
• Watch the moving roller shutter whilst carrying out the settings and keep other people away from the
area to avoid injury in the event of sudden slippage of the shutter.
• Watch the moving roller shutter during operation and keep other people away from the area until the
movement has been completed.
• Carry out all cleaning work on the roller shutter whilst the device is disconnected from the mains
power.
For awning systems which can be operated out of sight of the operator:
• The awning may not be operated if work is being carried out nearby (e.g. windows being cleaned).
For automatically actuated awnings:
• Disconnect the awning from the power supply if work is being carried out nearby.
A lack of maintenance can lead to personal injury through damage to your tubular motor and
roller shutter or awning system:
• Please check all of your roller shutter system components regularly for damage.
• Check regularly that the roller shutter system is functioning correctly.
• The shutter must not be damaged.
• Damaged components should be exchanged by a specialist roller shutter firm.
For awning systems:
• Check the awning regularly for poor balance or damaged lines and springs.
• Have damaged awnings repaired by a specialist awning firm.
A_VBD_100-007-1_RolloTube_105x148_8x_1c_220204.indd 11
11
EN
04.02.22 11:43