Appendix B: Circuit Diagram - GCE Healthcare M50 Manual De Usuario

Idiomas disponibles

Note: UT is the a.c. mains voltage prior to application of the test level.

Conducted RF

IEC 61000-4-6

Radiated RF

IEC 61000-4-3

Recommended Separation Distances Between Portable and Mobile RF Communications Equipment and

This Device

This device is intended for use in electromagnetic environments in which radiated RF disturbances are

controlled. The user of this device can help prevent electromagnetic interference by maintaining a minimum

distance between portable and mobile RF communications equipment (transmitters) and this device as out-

lined below, according to the maximum output power of the communications equipment.

RATED MAXIMUM

OUTPUT POWER OF

TRANSMITTER (WATTS)

0.01

0.1

100

For transmitters with maximum output power not stated above, the recommended separation distance

(d) in meters can be estimated using the formula applicable to the transmitter frequency, where P is the

maximum output power rating of the transmitter in watts (W) provided by the transmitter manufacturer.

NOTE 1: At 80 MHz and 800MHz, the separation distance for the higher frequency range applies.

NOTE 2: These guidelines may not apply in all situations. Electromagnetic propagation is aff ected by ab-

sorption and reﬂ ection from buildings, objects and people.

3Vrm

150kHz-80MHz

10V/m

80MHz-2.7GHz

SEPARATION DISTANCE ACCORDING TO FREQUENCY OF TRANSMITTER

150KHZ~80MHZ

D=1.2

0.12

0.38

1.2

3.8