Electronic Timer; Child Lock; Overheating Protection; Safety Lock - Gaggenau VF 230 614 Manual De Instrucciones

Electronic timer

You can set the timer for 1 to 90 minutes. The deep
fryer isn't turned on or off by the timer.
You can also use the timer when the appliance is
turned off.
Setting timer
Turn timer control knob to @ or A, to set the
1
desired time.
2 The set time is counted down on the display. You
can adjust the set time while the timer is running.
3 Once the time is up, a signal sounds. Briefly turn
the control knob to deactivate the signal.

Child lock

Turning on child lock
1 Turn temperature control knob right to any
temperature.
2 Turn timer control knob left to the minus position
and hold it at this position.
3 Turn temperature control knob back to 0 position.
4 Turn timer control knob back to 0 position.
The © symbol lights up on the display and goes out
after a short time. The child lock is activated. You can
now turn the control knob to any position without the
appliance heating up.
If the control knob is turned while the child lock is
activated, the © symbol appears on the display and
goes out after a short time.
10
Turning off child lock
1 Turn timer control knob left to the minus position
and hold it at this position.
2 Turn temperature control knob right to any
temperature.
3 Turn timer control knob back to 0 position.
The child lock is deactivated.

Overheating protection

In the event of overheating, the appliance
automatically turns off the heating element in order to
protect the countertop and cabinets. The © appears
on the display. Turn off the appliance and let it
completely cool down.
The appliance can overheat if:
▯
the deep frying basin is empty.
▯
there is too little deep frying oil or fat in the frying
basin (below minimum mark).
▯
very old deep frying oil or fat is used.
▯
The appliance has been set to a frying
temperature, although the frying fat is still cold
and has not been melted on the fat melting
setting.

Safety lock

The appliance is equipped with a safety lock for your
safety. Any heating process is terminated after 4 hours
if there is no operation in this time. Blinking hyphens
appear on the display.
Turn the temperature control knob to 0, then you can
start up the appliance again like normal.